Download Software:
1. Download and install Windows Installer 3.1
2. Download and install .NET Framework 2.0
3. Download Navifirm
Download Flashing Tools:
1. Download Nokia Flash Tools
(Contains JAF 1.98.62 , Pkey Emulator , Jaf_nok4models.ini File) install JAF 1.98.62 and put OGM pkey Emulator on Desktop.
Now place the Jaf_nok4models.ini file in c:\program files\ODEON\JAF\
Replace The older one with this file.
You have to install Nokia pc suite if you dont have Download from Here.
Flashing with JAF.
JAF will load files from here so copy your firmware files here:
1. copy all firmware to :"C:\Program Files\Nokia\Phoenix\Products\RM-356\" or
"C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-356\" (e.g. for Nokia 5230)
Note:- Change Rm-356 folder to your Nokia device Rm version. You can find it by dialing *#0000# or you can see your RM version backside of your mobile behind of Battery.
2. Connect your phone with PC Suite Mode.
3. Now open OGM_JAF_PKEY_Emulator_v3.exe from Desktop.
4. Now click GO. (Dont make any changes.)
5. Then you will see Error: BOX DRIVER NOT INSTALLED ==> click OK (don`t panic)
6. Now click on BB5 tab and untick CRT 308 and tick following:-
*Manual Flash
*Dead USB
*Use INI and wait for 20 seconds
7. Select your phone model and press Ok.
8. You will see MCU, PPM, CNT, APE Variant become green now. ( In some symbian devices CNT green glow didnt glow but dont worry Continue)
Connect your device and choose Mass Storage mode and delete four folders : sys, system, resources and private.
9. Now TURN OFF your phone !! and then click FLASH button after that press power button for 2 seconds (don't hold it) on your phone and JAF now will start flashing.
If Jaf dont detect your phone then try again and again until it not detected .
10. Fter completing flashing your phone will restart .
Note: -
1. Download and install Windows Installer 3.1
2. Download and install .NET Framework 2.0
3. Download Navifirm
Download Flashing Tools:
1. Download Nokia Flash Tools
(Contains JAF 1.98.62 , Pkey Emulator , Jaf_nok4models.ini File) install JAF 1.98.62 and put OGM pkey Emulator on Desktop.
Now place the Jaf_nok4models.ini file in c:\program files\ODEON\JAF\
Replace The older one with this file.
You have to install Nokia pc suite if you dont have Download from Here.
Flashing with JAF.
JAF will load files from here so copy your firmware files here:
1. copy all firmware to :"C:\Program Files\Nokia\Phoenix\Products\RM-356\" or
"C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-356\" (e.g. for Nokia 5230)
Note:- Change Rm-356 folder to your Nokia device Rm version. You can find it by dialing *#0000# or you can see your RM version backside of your mobile behind of Battery.
2. Connect your phone with PC Suite Mode.
3. Now open OGM_JAF_PKEY_Emulator_v3.exe from Desktop.
4. Now click GO. (Dont make any changes.)
5. Then you will see Error: BOX DRIVER NOT INSTALLED ==> click OK (don`t panic)
6. Now click on BB5 tab and untick CRT 308 and tick following:-
*Manual Flash
*Dead USB
*Use INI and wait for 20 seconds
7. Select your phone model and press Ok.
8. You will see MCU, PPM, CNT, APE Variant become green now. ( In some symbian devices CNT green glow didnt glow but dont worry Continue)
Connect your device and choose Mass Storage mode and delete four folders : sys, system, resources and private.
9. Now TURN OFF your phone !! and then click FLASH button after that press power button for 2 seconds (don't hold it) on your phone and JAF now will start flashing.
If Jaf dont detect your phone then try again and again until it not detected .
10. Fter completing flashing your phone will restart .
Note: -
Note:-
- You cant downgrade from new version to old. It will break your phone.
- If your phone breaked (dead) while flashing then flash again.
- After flashing successfully do a hard reset by this code : *#7370#
Now you done enjoy new features and much more.
0 comments:
Post a Comment